AJSolutions / Machines / NEO·HII
Tederic NEO range · two-platen power
- 480 – 5 500 t
- Two-platen structure
- Servo-hydraulic
- European KEBA control
NEO ·HII
Big mould space. Fast, even clamping.
NEO·HII brings patented two-platen technology, short-stroke clamping and linear-rail injection together for high-force production with a compact footprint.
Highlights
Why this range
- Superior energy saving over comparable two-platen machines.
- Injection weight repeatability ≤0.3%; mould-open position repeat accuracy ≤1 mm.
- Huge mould space with modular mould-opening cylinder design.
- High-torque electric plasticising as standard: plasticising on the fly.
- Clamping force
- 480 – 5 500 t· 4 800 – 55 000 kN
- Clamping structure
- Two-platen structure
- Power system
- Servo-hydraulic
- Control system
- European KEBA control
Technology
What is inside
Sliding foot support device
Oblique iron-type support carries heavier moulds — support weight increased by 15%.
Short stroke clamping cylinder + PullSure™
Boosted stroke builds clamping force faster and more evenly. Optional tie-bar retraction solves factory height limits and speeds up mould changes.
Huge mould space and opening stroke
Flexibility for more moulds, with the two-platen mould protection function.
Stable synchronous lock structure
Lock cylinder with buffer unit: accurate alignment without impact and even tie-bar force.
Double-layer rail injection, twin cylinders, electric plasticising
Better rigidity and repeat accuracy within 0.3%; balanced twin cylinders avoid material leakage; the high-torque electric preplasticising motor allows mould movement and plasticising on the fly.
Rotating injection unit
Screw replacement without dismantling the unit.
Higher pump power, modular cabinet
Full open-top linkage functions shorten the cycle; independent high and low voltage cabinets.
KEBA control, Industry 4.0 ready
15-inch Linux-based KEBA system, OPC and Modbus protocols, freely programmable for secondary development.
Applications
Main application sectors
Logistics crates and pallets, automotive interior and exterior, urban construction, large household appliances.
Model data
Choose your clamping force
Select a clamping force to see the standard injection units with all dimensions and details.
NEO·H480II
Clamping unit & dimensions
- Clamping force
- 480 t · 4 800 kN
- Clamping stroke
- 1 050 / 550 mm
- Space between tie bars
- 810×810 mm
- Mould height (min–max)
- 350–850 mm
- Max. daylight
- 1 400 mm
- Ejector stroke / force
- 260 / 124 (mm / kN)
- Platen (H×V)
- 1180×1180 mm
- Min. mould dimension
- 567×567 mm
- Machine weight
- on request
- Machine dimensions (L×W×H)
- 6,8×2,4×2,4 m
Standard injection units
| Screw | Ø mm | Shot volume cm³ | Shot weight PS g | Max. pressure MPa |
|---|---|---|---|---|
| A | 65 | 1 161 | 1 057 | 215.4 |
| B | 70 | 1 347 | 1 226 | 185.7 |
| C | 75 | 1 546 | 1 407 | 161.8 |
Diameter A gives the highest injection pressure, the largest diameter the biggest shot. Shot weight on polystyrene for reference.
Download technical dimensions (PDF)Source: Tederic parameter brochure 2026.01. Dimensions apply to the standard injection unit.
Run the numbers on NEO·HII.
Send the part drawing, material and target cycle time. You get a model proposal with the calculation, options and a delivery date.
Sold, installed and serviced by AJSolutions — Tederic's exclusive Benelux distributor.