AJSolutions / Machines / NEO·T
Tederic NEO range · toggle performance
- 90 – 1 050 t
- 5-point double toggle
- Servo-hydraulic
- Techmation & KEBA
NEO ·T
Minimalist engineering. Maximum repeatability.
NEO·T combines a high-response servo power system with a rigid five-point toggle for fast, efficient and repeatable production across the Benelux.
Highlights
Why this range
- New generation servo power system: 30–80% energy saving versus conventional hydraulics.
- Ultra-high response: maximum pressure reached in 28 ms, system pressure 17.5 MPa.
- Upgraded pump motor power shortens the cycle and widens the process window.
- Non-welded pipework for a cleaner hydraulic system and no leaks.
- Clamping force
- 90 – 1 050 t· 900 – 10 500 kN
- Clamping structure
- 5-point double toggle
- Power system
- Servo-hydraulic
- Control system
- Techmation & KEBA
Technology
What is inside
Ultra-high rigid platen structure
Built-in pin shaft provides a larger clamping space, improves the rigidity of the clamping unit and reduces machine length.
Extended, adjustable moving platen support
Supports heavier moulds — mould support weight increased by 15% — and parallelism is easy to adjust.
Injection double-layer linear rail
Linear guides on both carriage and injection give smooth movement and repeat accuracy under 0.5%. Injection speed increases 15–30% on small machines, 5–10% on large ones.
Swivelling injection unit
Screw and barrel changes without dismantling the carriage.
Toggle lubrication and brake circuit
Automatic lubrication pump with detector distributor; the mould-open brake circuit makes the end position more accurate.
Specialised controller
One-button operation panel, faster scan time, more IO points and cloud service for remote assistance and maintenance.
Professional electrical layout
Waterproof and dustproof cabinet, world-famous components, strong and weak current separated under a full EMC concept.
Clean hydraulics
Bypass filter, self-suction filter, non-welded pipeline and integrated cylinder assembly keep the oil clean.
Applications
Main application sectors
Packaging, thin wall, technical parts in series, urban construction, logistics.
Model data
Clamping unit per model
Scroll the table sideways for all columns.
| Model | Clamping forcet | Clamping forcekN | Clamping strokemm | Space between tie barsmm | Mould heightmin–max mm | Max. daylightmm | Ejectorstroke mm / kN | PlatenH×V mm | Injection units | Shot weight PSg |
|---|---|---|---|---|---|---|---|---|---|---|
| NEO·T90 | 90 | 900 | 340 | 360×360 | 150–390 | 730 | 120 / 34 | 530×530 | i380 | 153–221 |
| NEO·T130 | 130 | 1 300 | 360 | 410×410 | 150–450 | 810 | 120 / 34 | 610×610 | i510 | 201–282 |
| NEO·T160 | 160 | 1 600 | 450 | 470×470 | 180–530 | 980 | 150 / 49 | 700×700 | i600 | 284–402 |
| NEO·T200 | 200 | 2 000 | 510 | 530×530 | 200–560 | 1 070 | 150 / 67 | 800×800 | i850 | 340–508 |
| NEO·T260 | 260 | 2 600 | 550 | 610×570 | 220–600 | 1 150 | 160 / 67 | 890×850 | i1100 | 475–684 |
| NEO·T300 | 300 | 3 000 | 640 | 660×620 | 250–680 | 1 320 | 160 / 67 | 970×940 | i1500 | 597–833 |
| NEO·T360 | 360 | 3 600 | 650 | 710×670 | 250–685 | 1 335 | 160 / 67 | 1035×1005 | i1900 | 769–1 047 |
| NEO·T400 | 400 | 4 000 | 720 | 760×710 | 280–750 | 1 470 | 200 / 124 | 1100×1050 | i2500 | 1 057–1 407 |
| NEO·T450 | 450 | 4 500 | 800 | 780×780 | 300–780 | 1 580 | 200 / 124 | 1155×1155 | i3200 | 1 380–1 802 |
| NEO·T500 | 500 | 5 000 | 800 | 820×820 | 320–800 | 1 600 | 200 / 124 | 1205×1205 | i3800 | 1 624–2 086 |
| NEO·T600 | 600 | 6 000 | 900 | 880×880 | 350–900 | 1 800 | 260 / 182 | 1285×1285 | i4800 | 2 040–2 582 |
| NEO·T650 | 650 | 6 500 | 940 | 920×920 | 400–940 | 1 880 | 260 / 182 | 1340×1340 | i5800 | 2 442–3 381 |
| NEO·T700 | 700 | 7 000 | 980 | 960×960 | 380–950 | 1 930 | 260 / 182 | 1410×1410 | i5800 | 2 442–3 381 |
| NEO·T800 | 800 | 8 000 | 1 050 | 1020×1020 | 400–1 000 | 2 050 | 300 / 182 | 1490×1490 | i7500 | 2 981–4 454 |
| NEO·T1050 | 1 050 | 10 500 | 1 230 | 1160×1160 | 500–1 160 | 2 390 | 350 / 269 | 1680×1680 | i9500 | 3 931–5 661 |
Source: Tederic parameter brochure NEO·T 2026.01. Clamping force in kN; the tonnage in the model name is the customary rounding.
Injection units
Screw diameter sets pressure and output
Each unit comes with three (sometimes four) screw diameters. Diameter A gives the highest injection pressure, the largest diameter the biggest shot.
| Injection unit | Screw diameterA / B / C — mm | Theoretical shot volumecm³ | Shot weight PSg | Max. injection pressureMPa |
|---|---|---|---|---|
| i380 | 35 / 38 / 42 | 168 / 198 / 242 | 153 / 181 / 221 | 227.9 / 193.3 / 158.2 |
| i510 | 38 / 42 / 45 | 221 / 270 / 310 | 201 / 246 / 282 | 232.7 / 190.5 / 165.9 |
| i600 | 42 / 45 / 50 | 312 / 358 / 442 | 284 / 326 / 402 | 223.5 / 194.7 / 157.7 |
| i850 | 45 / 50 / 55 | 374 / 461 / 558 | 340 / 420 / 508 | 229.9 / 186.2 / 153.9 |
| i1100 | 50 / 55 / 60 | 522 / 632 / 752 | 475 / 575 / 684 | 215.3 / 177.9 / 149.5 |
| i1500 | 55 / 60 / 65 | 656 / 780 / 916 | 597 / 710 / 833 | 221.3 / 185.9 / 158.4 |
| i1900 | 60 / 65 / 70 | 845 / 992 / 1 151 | 769 / 903 / 1 047 | 218.8 / 186.4 / 160.7 |
| i2500 | 65 / 70 / 75 | 1 161 / 1 347 / 1 546 | 1 057 / 1 226 / 1 407 | 215.4 / 185.7 / 161.8 |
| i3200 | 70 / 75 / 80 | 1 516 / 1 741 / 1 980 | 1 380 / 1 584 / 1 802 | 212.1 / 184.8 / 162.4 |
| i3800 | 75 / 80 / 85 | 1 785 / 2 031 / 2 293 | 1 624 / 1 848 / 2 086 | 205.3 / 180.5 / 159.9 |
| i4800 | 80 / 85 / 90 | 2 242 / 2 531 / 2 837 | 2 040 / 2 303 / 2 582 | 204.4 / 181.1 / 161.5 |
| i5800 | 85 / 90 / 100 | 2 684 / 3 009 / 3 715 | 2 442 / 2 738 / 3 381 | 202.9 / 180.9 / 146.6 |
| i7500 | 90 / 100 / 110 | 3 276 / 4 045 / 4 894 | 2 981 / 3 681 / 4 454 | 222.4 / 180.2 / 148.9 |
| i9500 | 100 / 110 / 120 | 4 320 / 5 227 / 6 220 | 3 931 / 4 756 / 5 661 | 212.8 / 175.9 / 147.8 |
Theoretical shot volume = barrel cross-section × injection stroke. Shot weight is calculated on polystyrene (0.91 g/cm³) for reference; actual values depend on material and settings.
Installation
Footprint, weight and mould size
| Model | Min. mould dimensionmm | Machine weight | Machine dimensionsL×W×H, m |
|---|---|---|---|
| NEO·T90 | 252×252 | 3.5 t | 4,34×1,3×2,0 |
| NEO·T130 | 287×287 | 4.4 t | 4,66×1,45×2,07 |
| NEO·T160 | 329×329 | 5.5 t | 4,98×1,31×2,11 |
| NEO·T200 | 371×371 | 7 t | 5,26×1,68×2,17 |
| NEO·T260 | 427×399 | 8.5 t | 5,45×1,73×2,20 |
| NEO·T300 | 462×434 | 10 t | 6,16×1,7×2,40 |
| NEO·T360 | 497×469 | 12.4 t | 6,56×1,89×2,31 |
| NEO·T400 | 532×497 | 16.8 t | 7,40×2,11×2,46 |
| NEO·T450 | 546×546 | 17.8 t | 7,75×2,11×2,47 |
| NEO·T500 | 574×574 | 21.2 t | 8,1×2,17×2,65 |
| NEO·T600 | 616×616 | 25.4 t | 9,2×2,15×2,8 |
| NEO·T650 | 644×644 | 26.7 t | 9,85×2,18×2,8 |
| NEO·T700 | 672×672 | 30 t | 10×2,19×2,87 |
| NEO·T800 | 714×714 | 36.5 t | 10,7×2,27×3,03 |
| NEO·T1050 | 812×812 | 48.3 t | 11,7×2,5×2,93 |
Dimensions apply to the standard injection unit; larger units make the machine longer. Add space for robot, material feed and maintenance access — we draw the complete cell into your floor plan.
Run the numbers on NEO·T.
Send the part drawing, material and target cycle time. You get a model proposal with the calculation, options and a delivery date.
Sold, installed and serviced by AJSolutions — Tederic's exclusive Benelux distributor.