AJSolutions / Machines / NEO·EII
Tederic NEO range · all-electric precision
- 60 – 1 400 t
- 5-point toggle
- All-electric
- European KEBA control
NEO ·EII
Pure electric control for uncompromising parts.
NEO·EII pairs full servo motor control with energy recovery, precise positioning and a clean, repeatable production environment.
Highlights
Why this range
- Pressure control accuracy ±1 bar, giving 0.1% part-quality repeatability.
- Injection speeds up to 500 mm/s (f-execution).
- Full servo control; repeat positioning accuracy of mould-open position to 0.01 mm.
- Screw runout within 0.05 mm, down to 0.03 mm for optical applications.
- Energy recovery system as standard; energy consumption class Euromap 9+.
- Clamping force
- 60 – 1 400 t· 600 – 14 000 kN
- Clamping structure
- 5-point toggle
- Power system
- All-electric
- Control system
- European KEBA control
Technology
What is inside
5-point toggle structure
Strengthened platen and stabilised toggle designed by mechanical and motion analysis. The V-shaped toggle presses centrally, spreading clamping force evenly and protecting mould life.
Linear guide rail on the moving platen
Higher mould load capacity, better parallelism and positioning accuracy, lower energy consumption and a cleaner mould area.
Full motor professional control
Fully upgraded control system with a 15-inch touch screen.
NSK components, 25 ms response
A full set of NSK transmission components and a custom low-inertia servo motor with 25 ms acceleration response.
Modular body and cabinet
Positioned body design, modular assembly, automatic welding; EMC-designed electrical cabinet for reliable, serviceable operation.
Double track injection, adjustable screw
Fast start, smooth run and precise positioning; screw concentricity guaranteed for optical-grade parts.
Applications
Main application sectors
Medical and cleanroom, optical and electronics, thin-wall packaging, precision technical parts.
Model data
Choose your clamping force
Select a clamping force to see the standard injection units with all dimensions and details.
NEO·E60II
Clamping unit & dimensions
- Clamping force
- 60 t · 600 kN
- Clamping stroke
- 270 mm
- Space between tie bars
- 360×320 mm
- Mould height (min–max)
- 150–380 mm
- Max. daylight
- 650 mm
- Ejector stroke / force
- 60 / 24.5 (mm / kN)
- Platen (H×V)
- 545×505 mm
- Min. mould dimension
- 250×225 mm
- Machine weight
- 3.7 t
- Machine dimensions (L×W×H)
- 4,3×1,3×1,9 m
Standard injection units
| Screw | Ø mm | Shot volume cm³ | Shot weight PS g | Max. pressure MPa |
|---|---|---|---|---|
| A | 20 | 30 | 27 | 266 |
| B | 22 | 36 | 33 | 220 |
| C | 25 | 46 | 42 | 170 |
Diameter A gives the highest injection pressure, the largest diameter the biggest shot. Shot weight on polystyrene for reference.
Download technical dimensions (PDF)Source: Tederic parameter brochure 2026.01. Dimensions apply to the standard injection unit.
Run the numbers on NEO·EII.
Send the part drawing, material and target cycle time. You get a model proposal with the calculation, options and a delivery date.
Sold, installed and serviced by AJSolutions — Tederic's exclusive Benelux distributor.